A 4-layer PCB with a solid ground plane and thermal vias is recommended for optimal thermal performance. The device should be placed near a thermal pad or a heat sink to dissipate heat efficiently.
Use the Intel Quartus Prime software to program and configure the FPGA. Ensure that the device is properly powered and clocked before programming, and follow the recommended programming sequence outlined in the Quartus Prime documentation.
The power supplies should be sequenced in the following order: VCC, VCCIO, and then VCCA. The power-down sequence should be reversed. Ensure that the power supplies are stable and within the recommended voltage ranges before configuring the device.
Handle the device by the body or the pins, avoiding touching the die or wire bonds. Store the device in an anti-static bag or wrap it in anti-static material to prevent electrostatic discharge damage.
The device operates in the commercial temperature range of 0°C to 70°C, with a relative humidity of 5% to 95%. It is not recommended to operate the device outside of these conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EPM3128ATC100-7N Overview
Use the download button to access the EPM3128ATC100-7N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EPM31,
or try a keyword search, such as Programmable Logic Devices
