3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for ER14250
- Part Number ER14250
- Manufacturer EVE
- Pin Count 999
- Last Modified Date Jun 14, 2024 8:18 AM UTC
- Pinout / Pin List Click Here (Member Only)
ER14250 Details
-
Manufacturer Part Number:
ER14250
-
Part Life Cycle Code:
Contact Manufacturer
-
ECCN Code:
3A991.J.1
-
HTS Code:
8506.80.00.00
-
Manufacturer:
EVE ENERGY CO., LTD.
-
Approvals:
IEC; UL
-
Battery Chemistry:
LITHIUM-THIONYL CHLORIDE
-
Battery Size:
1/2AA
-
Battery Type:
PRIMARY
-
Capacity:
1.2 Ah
-
Cut-off Voltage:
2 V
ER14250 Frequently Asked Questions (FAQs)
-
The recommended storage temperature for ER14250 batteries is between 20°C to 30°C (68°F to 86°F), with a relative humidity of 60% to 80%. Avoid storing them in extreme temperatures or humid environments.
-
Yes, ER14250 batteries can be used in series or parallel connections to achieve higher voltage or capacity. However, it's essential to follow proper connection and balancing techniques to ensure safe and reliable operation.
-
The self-discharge rate of ER14250 batteries is approximately 2% to 3% per month at room temperature (20°C to 30°C or 68°F to 86°F). This means that the battery will retain around 90% of its capacity after 6 months of storage.
-
No, ER14250 batteries are not designed for rapid charging. They should be charged using a standard charging method with a constant current and voltage, as specified in the datasheet. Rapid charging may cause overheating, damage, or reduce the battery's lifespan.
-
The recommended charging cycle for ER14250 batteries is 300 to 500 cycles, depending on the depth of discharge (DOD) and charging method. It's essential to follow the manufacturer's charging guidelines to ensure optimal performance and lifespan.
Trust Checks
Trust Score Unavailable
ER14250 Overview
Use the download button to access the ER14250 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
