Description:Thick Film Chip Resistor 0.1W 0603 53K6 Panasonic E96 Series Precision Thick Film Surface Mount Resistor 0603 Case 53.6kΩ ±1% 0.1W ±100ppm/°C
The recommended land pattern for ERJ3EKF5362V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ3EKF5362V should be placed on a flat, even surface to prevent warping or deformation. The component should be aligned with the PCB pads and secured with a gentle pressure to ensure proper solder wetting. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The maximum power rating for ERJ3EKF5362V is 0.25W. Exceeding this rating may cause the component to overheat, leading to reduced performance or even failure.
Yes, ERJ3EKF5362V is suitable for high-frequency applications up to 100MHz. However, it's essential to consider the component's self-resonant frequency, which is around 10MHz, and take necessary precautions to minimize parasitic inductance and capacitance.
ERJ3EKF5362V should be stored in a dry, cool place with a relative humidity of 60% or less. The component should be packaged in its original packaging or a similar moisture-proof bag to prevent moisture absorption. Avoid exposing the component to direct sunlight, high temperatures, or humid environments.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJ3EKF5362V Overview
Use the download button to access the ERJ3EKF5362V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ3E,
or try a keyword search, such as Fixed Resistors
Suggested Parts
If you searched for ERJ3EKF5362V, you might also be interested in these parts:
