The recommended land pattern for ERJ3EKF9092V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ3EKF9092V should be placed on a flat, even surface to prevent warping or deformation. The component should be aligned with the PCB pads and secured with a gentle pressure to ensure proper solder wetting. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The maximum power rating for ERJ3EKF9092V is 0.25W. Exceeding this rating may cause the component to overheat, leading to reduced performance or even failure.
Yes, ERJ3EKF9092V is suitable for high-frequency applications up to 100MHz. However, it's essential to consider the component's self-resonant frequency, which is around 200MHz, and ensure that the operating frequency is below this point to avoid resonance and potential performance issues.
ERJ3EKF9092V should be stored in a dry, cool place with a relative humidity of 60% or less and a temperature range of -10°C to 40°C. The component should be kept away from direct sunlight, moisture, and contaminants. It's recommended to store the component in its original packaging or a similar protective environment.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJ3EKF9092V Overview
Use the download button to access the ERJ3EKF9092V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ3E,
or try a keyword search, such as Fixed Resistors
