The recommended land pattern for ERJL03KF47MV is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJL03KF47MV should be placed on a flat, even surface to prevent tombstoning. The component should be aligned with the PCB pads and the solder paste should be applied evenly. The recommended reflow profile is 260°C peak temperature, with a dwell time of 30-60 seconds above 220°C.
The ERJL03KF47MV is a general-purpose resistor and is not optimized for high-frequency applications. While it can be used up to a few hundred kHz, it may not provide the best performance or stability at higher frequencies. For high-frequency applications, a specialized resistor with a higher frequency rating should be used.
The ERJL03KF47MV has a maximum operating temperature of 150°C. While it can tolerate short-term excursions up to 200°C, prolonged exposure to high temperatures can affect its performance and reliability. If your application requires operation above 150°C, a high-temperature resistor should be used.
The ERJL03KF47MV has a power rating of 0.1W. To ensure it meets your application's power rating requirements, calculate the maximum power dissipation using the formula P = V^2/R, where V is the voltage across the resistor and R is the resistance value. Make sure the calculated power dissipation is below the maximum rating of 0.1W.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJL03KF47MV Overview
Use the download button to access the ERJL03KF47MV schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJL0,
or try a keyword search, such as Fixed Resistors
