The recommended land pattern for ERJU08F1800V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJU08F1800V should be placed on a flat, even surface to prevent warping or deformation. The component should be aligned with the PCB pads and secured with a gentle pressure to ensure proper solder wetting. The recommended reflow profile is 260°C peak temperature, with a ramp-up rate of 3°C/s and a dwell time of 30-60 seconds.
The maximum power rating for ERJU08F1800V is 0.25W. Exceeding this rating may cause the component to overheat, leading to reduced performance or even failure.
Yes, ERJU08F1800V is suitable for high-frequency applications up to 100MHz. However, it's essential to consider the component's self-resonant frequency (SRF) and ensure that it does not resonate at the operating frequency. Additionally, the PCB layout and component placement should be optimized to minimize parasitic inductance and capacitance.
ERJU08F1800V should be stored in a dry, cool place, away from direct sunlight and moisture. The components should be handled with care to prevent mechanical stress, bending, or twisting. It's recommended to use anti-static packaging and handling tools to prevent electrostatic discharge (ESD) damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJU08F1800V Overview
Use the download button to access the ERJU08F1800V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJU0,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
