Littelfuse recommends a thermal pad on the bottom of the device, with a minimum of 2 oz copper thickness and a thermal relief pattern to ensure good heat dissipation. A minimum of 1 mm clearance around the device is also recommended.
Littelfuse recommends using a soldering iron with a temperature of 250°C to 260°C, and a solder with a melting point of 217°C to 221°C. The device should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for proper wetting and filleting.
The EV1K100.ZXBD has a maximum surge current rating of 100 A for 10 ms, and 50 A for 100 ms. However, it's recommended to consult the datasheet and application notes for specific surge current requirements and derating factors.
The EV1K100.ZXBD has a maximum operating temperature of 150°C, but it's recommended to derate the device's current rating and voltage rating at higher temperatures. Consult the datasheet and application notes for specific temperature derating factors.
Littelfuse recommends using a fuse holder or clip that is specifically designed for the EV1K100.ZXBD, with a minimum of 10 A current rating and a maximum of 1.5 mm² wire size. Consult the datasheet and application notes for specific recommendations.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
EV1K100.ZXBD Overview
Use the download button to access the EV1K100.ZXBD 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like EV1K1,
or try a keyword search, such as Electric Fuses
