Part Image

FAN4852IMU8X - onsemi

Description: Output Swing to within 10mV of Either Rail; Input Voltage Range Exceeds the Rails; 0.8mA Supply Current ; Fully Specified at +3.3V and +5V Supplies; 6V/µs Slew Rate; 11nV/√Hz Input Voltage Noise; 9 MHz Bandwidth

Download FAN4852IMU8X Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FAN4852IMU8X - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - 8-Lead, Molded Small-Outline Package (MSOP)
click to zoom
3D Models
FAN4852IMU8X - onsemi  - 3D model - Small Outline Packages - 8-Lead, Molded Small-Outline Package (MSOP)
click to zoom

FAN4852IMU8X Details

  • Manufacturer Part Number:

    FAN4852IMU8X

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    Micro8

  • Package Description:

    MO-187, MSOP-8

  • Manufacturer Package Code:

    846A-02

  • Country Of Origin:

    Mainland China

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    onsemi

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0005 µA

  • Bias Current-Max (IIB) @25C:

    0.00001 µA

  • Common-mode Reject Ratio-Min:

    76 dB

  • Common-mode Reject Ratio-Nom:

    117 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1200 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TAPE AND REEL

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    6.1 V/us

  • Supply Current-Max:

    1.2 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    9000

  • Voltage Gain-Min:

    70800

  • Wideband:

    NO

  • Width:

    3 mm

FAN4852IMU8X Frequently Asked Questions (FAQs)

  • A good thermal design should include a solid ground plane, thermal vias under the IC, and a heat sink if possible. The datasheet provides some guidelines, but a more detailed application note is available on the onsemi website.
  • In addition to following the recommended PCB layout, ensure that the device is operated within the specified junction temperature range (TJ) of -40°C to 150°C. Also, consider using a heat sink or thermal interface material to reduce thermal resistance.
  • The maximum allowed voltage on the input pins is the supply voltage (VCC) + 0.3V. Exceeding this voltage may cause damage to the device.
  • The FAN4852IMU8X has built-in ESD protection, but it's still important to follow proper ESD handling procedures during manufacturing and assembly. Use an ESD wrist strap or mat, and ensure that all equipment is properly grounded.
  • A 0.1uF to 1uF ceramic capacitor is recommended for VCC bypassing. This helps to filter out noise and ensure stable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FAN4852IMU8X Overview

Use the download button to access the FAN4852IMU8X schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FAN48, or try a keyword search, such as Operational Amplifiers

Parts related to FAN4852IMU8X

Showing 0 results

FAN4852IMU8X Alternates

Showing results

Image Part Number Model
Part Image FAN4852IMU8X Fairchild Semiconductor Corporation

Operational Amplifier, 2 Func, 1200uV Offset-Max, CMOS, PDSO8