A good PCB layout for the FDS9945 involves keeping the high-current paths short and wide, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a shielded inductor and to keep the switching node (SW) away from sensitive analog circuits.
To optimize the FDS9945 for low standby power consumption, ensure that the EN pin is properly biased, use a low-ESR output capacitor, and minimize the output voltage ripple. Additionally, consider using a low-quiescent-current LDO regulator for the VCC supply.
The maximum allowed voltage on the VIN pin is 25V, but it's recommended to keep it below 20V to ensure reliable operation and to prevent damage to the device.
To ensure stability, follow the recommended component values and PCB layout guidelines. Additionally, ensure that the output capacitor is properly sized and that the feedback network is properly compensated. If oscillations occur, try adding a small capacitor (e.g., 10nF) between the VOUT and GND pins.
The FDS9945 is rated for operation up to 125°C, but its performance may degrade at high temperatures. Ensure that the device is properly heatsinked and that the thermal design is adequate for the specific application.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FDS9945 Overview
Use the download button to access the FDS9945 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FDS99,
or try a keyword search, such as Small Signal Field-Effect Transistors
