XP Power recommends a PCB layout with a large copper area connected to the tab of the FGSMA10BFR to dissipate heat efficiently. A minimum of 1 square inch of copper area is recommended, with multiple vias to the bottom layer to further improve thermal performance.
To ensure reliable start-up, XP Power recommends a soft-start circuit or a ramp-up of the input voltage to prevent inrush currents. Additionally, a minimum input capacitance of 10uF is recommended to ensure stable operation.
The maximum allowable capacitance on the output of the FGSMA10BFR is 47uF. Exceeding this value may cause instability or oscillation in the converter.
While the FGSMA10BFR is rated for operation up to 85°C, XP Power recommends derating the output power by 2.5% per degree above 70°C to ensure reliable operation. Additionally, the ambient temperature should not exceed 85°C for more than 20% of the operating time.
XP Power recommends checking the input voltage, output load, and PCB layout for any issues. Additionally, measuring the voltage on the enable pin and the output voltage can help identify the root cause of the problem. Consult the datasheet and application notes for more detailed troubleshooting guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FGSMA10BFR Overview
Use the download button to access the FGSMA10BFR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FGSMA,
or try a keyword search, such as Mains Power Connectors
