Description:8 mm Creepage and Clearance Distance, and 0.4 mm Insulation Distance to Achieve Reliable and High Voltage Insulation; Specifications Guaranteed Over 3 V to 5.5 V Supply Voltage and -40°C to 100°C Extended Industrial Temperature Range; High Noise Immunity Characterized by Common Mode Transient Immunity (CMTI) – 20 kV/µs Minimum CMTI; High-Speed, 10 Mbit/s Data Rate (NRZ); Safety and Regulatory Approvals – UL1577, 5,000 VACRMS for 1 Minute – DIN-EN/IEC60747-5-5, 1,140 V Peak Working Insulation Voltage
A good PCB layout for the FOD8163V involves keeping the input and output traces short and separate, using a solid ground plane, and placing the device close to the photodiode. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the device should be placed in a quiet area of the board, away from high-frequency signals and noise sources.
The FOD8163V requires a bias voltage of 5V ± 10% to operate correctly. Ensure that the power supply is stable and noise-free, and that the voltage regulator is capable of providing a clean 5V output. Additionally, the bias voltage should be applied before the input signal to prevent damage to the device.
The FOD8163V can handle photodiode capacitances up to 100 pF. However, it's recommended to keep the photodiode capacitance as low as possible to minimize the effects of capacitance on the device's performance. A lower photodiode capacitance will result in better noise performance and faster response times.
Yes, the FOD8163V can be used with other photodiodes, but the performance may vary. The SFH 203 FA is recommended due to its high sensitivity and low capacitance. When using a different photodiode, ensure that it has a similar or lower capacitance and is compatible with the FOD8163V's operating conditions.
To troubleshoot issues with the FOD8163V, start by verifying the power supply voltage and ensuring that it is within the recommended range. Check the input signal and photodiode connection for any issues. Use an oscilloscope to measure the output voltage and check for noise or oscillations. If the issue persists, consult the datasheet and application notes for guidance or contact onsemi support.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FOD8163V Overview
Use the download button to access the FOD8163V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FOD81,
or try a keyword search, such as Optocoupler
