Description:High Speed Performance ~ 30kHz; Current Transfer Ratio: 100% to 600%; Minimum BVCEO of 80V Guaranteed; Safety and Regulatory Approvals:; UL1577, 5,000 VACRMS for 1 Minute; DIN EN/IEC60747-5-5, 850V Peak Working Insulation Voltage
A good PCB layout for the FOD819SD should ensure minimal parasitic inductance and capacitance. Keep the input and output traces short and away from each other, and use a solid ground plane to reduce noise. A 4-layer PCB with a dedicated power plane and a separate ground plane is recommended.
The FOD819SD requires a bias voltage of 5V to 15V. Ensure the bias voltage is stable and within the recommended range. A decoupling capacitor (e.g., 10nF) should be placed close to the VCC pin to filter out noise. Additionally, a pull-up resistor (e.g., 1kΩ) can be used to ensure the output is in a high state when the input is open or floating.
The maximum cable length depends on the specific application and the type of cable used. As a general guideline, the FOD819SD can drive cables up to 10 meters (33 feet) long with a capacitance of up to 100pF. However, it's recommended to consult the datasheet and perform simulations or testing to determine the optimal cable length for your specific use case.
The FOD819SD has built-in ESD protection, but additional protection measures can be taken. Use TVS diodes or ESD protection devices on the input and output lines to protect against electrostatic discharge. For overvoltage protection, consider using a voltage regulator or a transient voltage suppressor (TVS) to limit the voltage to within the recommended range.
The typical rise and fall time of the FOD819SD output signal is around 10ns to 20ns, depending on the load capacitance and the output current. However, this can vary depending on the specific application and operating conditions. Consult the datasheet and perform testing to determine the actual rise and fall times for your specific use case.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FOD819SD Overview
Use the download button to access the FOD819SD schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like FOD81,
or try a keyword search, such as Optocoupler
