Description:Current Transfer Ratio Ranges from 80 to 600% at IF = 5 mA, VCE = 5 V, TA = 25ºC- FODM217A - 80 to 160%- FODM217B - 130 to 260%- FODM217C - 200 to 400%- FODM217D - 300 to 600%; Applicable to Infrared Ray Reflow, 260ºC; Safety and Regulatory Approvals: - UL1577, 3750 VACRMS for 1 min - DIN EN/IEC60747-5-5, 565 V Peak Working Insulation Voltage
The maximum voltage that can be applied to the input pins is 5.5V, which is the absolute maximum rating. However, it's recommended to keep the input voltage below 5V to ensure reliable operation.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground. Also, make sure to decouple the power supply with a 0.1uF capacitor to reduce noise and ensure stable operation.
For optimal performance, keep the input and output traces as short as possible, and avoid running them near noise-sensitive areas. Use a solid ground plane and decouple the power supply to reduce noise. Also, consider using a guard ring around the input pins to reduce noise and EMI.
The FODM217D has built-in ESD protection, but it's still recommended to take precautions during handling and assembly. Use an ESD wrist strap or mat, and handle the device by the body or pins, not the leads. Also, ensure that the PCB is properly grounded and that there are no static-generating materials nearby.
The recommended operating temperature range for the FODM217D is -40°C to 85°C. However, the device can operate up to 125°C for short periods of time, but this may affect its reliability and lifespan.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FODM217D Overview
Use the download button to access the FODM217D schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like FODM2,
or try a keyword search, such as Optocoupler
