Description:High Noise Immunity characterized by common mode transient immunity (CMTi) - 20kV/µs Minimum CMTi; High Speed – 20Mbit/sec Date Rate (NRZ)– 55ns max. Propagation Delay – 20ns max. Pulse Width Distortion– 30ns max. Propagation Delay Skew; 3.3V and 5V CMOS compatibility; Safety and regulatory approvals – UL1577, 3750 VACRMS for 1 min.– IEC60747-5-2 (pending approval); Specifications guaranteed over 3V to 5.5V supply voltage and -40 to +110°C temperature range
A good PCB layout for FODM8071 involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the load. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper biasing, connect the EN pin to a voltage source (e.g., VCC) through a 10kΩ resistor, and connect the IN pin to a voltage source (e.g., VCC) through a 1kΩ resistor. Also, make sure the input voltage is within the recommended range (2.5V to 5.5V).
The maximum current rating of the FODM8071 is 1A. However, it's recommended to derate the current to 0.8A for continuous operation to ensure reliability and prevent overheating.
To protect the FODM8071 from overvoltage and undervoltage conditions, use a voltage regulator (e.g., LDO) to regulate the input voltage to the recommended range (2.5V to 5.5V). Additionally, consider adding overvoltage protection (OVP) and undervoltage protection (UVP) circuits to prevent damage from voltage transients.
The recommended operating temperature range for the FODM8071 is -40°C to 125°C. However, it's recommended to derate the device's performance at extreme temperatures (e.g., above 100°C) to ensure reliability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FODM8071 Overview
Use the download button to access the FODM8071 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FODM8,
or try a keyword search, such as Optocoupler
Suggested Parts
If you searched for FODM8071, you might also be interested in these parts:
