Description:Isolation voltage rating of 1500Vrms for 1min.; Temperature sensing built in HVIC; Active-High interface, can work with 3.3V/5V logic; HVIC for gate driving and under-voltage protection; Three separate open-emitter pins from low side MOSFETs for three leg current sensing; Moisture Sensitive Level (MSL) 3; Optimized for low electromagnetic interference; RoHS compliant; 500V RDS(on)=1.4Ω(max) FRFET® MOSFET 3-phase inverter including HVICs; Embedded bootstrap diodes in the package
The maximum operating temperature range for the FSB50550AS is -40°C to 150°C.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the EN pin to a logic-level signal (e.g., 3.3V or 5V) to enable the device. Additionally, decouple the VCC pin with a 10uF capacitor to minimize noise.
For optimal thermal performance, use a multi-layer PCB with a solid ground plane, and place thermal vias under the device. Ensure good airflow around the device, and consider using a heat sink if high-power operation is expected.
Use a voltage regulator to regulate the input voltage, and consider adding overvoltage protection (OVP) and overcurrent protection (OCP) circuits to prevent damage from voltage spikes and excessive current.
Use a gate drive circuit with a high-current capability (e.g., TC4420 or equivalent) to ensure fast switching times and minimize power losses. Ensure the gate drive voltage is within the recommended range (e.g., 5V to 15V).
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FSB50550AS Overview
Use the download button to access the FSB50550AS 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FSB50,
or try a keyword search, such as Motion Control Electronics
