The maximum operating temperature range for the FSB70250 is -40°C to 150°C.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the EN pin to a logic high (VCC) to enable the device. Also, ensure the input voltage (VIN) is within the recommended range of 4.5V to 18V.
To minimize EMI and thermal issues, use a multi-layer PCB with a solid ground plane, keep the input and output traces short and separate, and use thermal vias to connect the exposed pad to a heat sink or thermal plane.
Use a voltage regulator or a transient voltage suppressor (TVS) to protect the FSB70250 from overvoltage conditions. For overcurrent protection, add a fuse or a current-limiting resistor in series with the input voltage.
Use a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of 25V or higher, placed as close as possible to the VIN pin.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FSB70250 Overview
Use the download button to access the FSB70250 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FSB70,
or try a keyword search, such as Motion Control Electronics
