Description:Single-grounded power supply for built-in HVICs; Very low thermal resistance by using Al2O3 DBC; Three separate negative DC-link terminals for inverter current sensing applications; 600V-20A 3-phase IGBT inverter bridge including control ICs for gate driving and protection ; Isolation rating of 2500Vrms/min.; Easy PCB layout thanks to built in bootstrap diodes
The maximum junction temperature of the FSBB20CH60C is 150°C. However, it's recommended to operate the device at a temperature below 125°C for reliable operation.
To ensure proper cooling, it's recommended to attach a heat sink to the device. The heat sink should be designed to provide a thermal resistance of less than 10°C/W. Additionally, ensure good airflow around the device to prevent overheating.
The recommended gate drive voltage for the FSBB20CH60C is between 10V and 15V. However, the device can tolerate gate drive voltages up to 20V, but this may reduce the device's lifespan.
Yes, the FSBB20CH60C is suitable for high-frequency switching applications up to 100 kHz. However, the device's switching losses and thermal performance should be carefully evaluated to ensure reliable operation.
To protect the FSBB20CH60C from overvoltage and overcurrent, it's recommended to use a voltage clamp circuit and a current sense resistor. Additionally, consider using a fuse or a circuit breaker to protect the device from excessive current.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FSBB20CH60C Overview
Use the download button to access the FSBB20CH60C 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FSBB2,
or try a keyword search, such as Motion Control Electronics
