CHIP CARRIER, HEAT SINK/SLUG, VERY VERY THIN PROFILE
Peak Reflow Temperature (Cel):
260
Seated Height-Max:
1 mm
Supply Current-Max (Isup):
3.2 mA
Supply Voltage-Max (Vsup):
3.6 V
Supply Voltage-Min (Vsup):
3 V
Supply Voltage-Nom (Vsup):
3.3 V
Surface Mount:
YES
Switch-off Time-Max:
50000 ns
Switch-on Time-Max:
2000 ns
Terminal Finish:
Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form:
NO LEAD
Terminal Pitch:
0.5 mm
Terminal Position:
QUAD
Time@Peak Reflow Temperature-Max (s):
30
Width:
8 mm
HD3SS215IRTQR Frequently Asked Questions (FAQs)
Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the high-speed signals away from the edges of the board. Additionally, use a common mode filter and a shielded cable to reduce EMI.
To ensure signal integrity, use a 100-ohm differential impedance for the USB traces, keep the traces short and matched, and use a common mode filter to reduce noise. Also, use a signal integrity tool to simulate and optimize the design.
The HD3SS215IRTQR supports cable lengths up to 3 meters, but the actual length may vary depending on the cable quality, signal frequency, and system noise. It's recommended to use a high-quality cable and to test the system with the maximum cable length.
The HD3SS215IRTQR can be configured for USB 3.0 or USB 2.0 mode by setting the MODE pin high or low, respectively. Additionally, the device can be configured using the I2C interface to set the operating mode, data rate, and other parameters.
The power consumption of the HD3SS215IRTQR depends on the operating mode and data rate. In USB 3.0 mode, the typical power consumption is around 150 mA, while in USB 2.0 mode, it's around 50 mA. The device also has a low-power mode that consumes around 10 mA.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HD3SS215IRTQR Overview
Use the download button to access the HD3SS215IRTQR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HD3SS,
or try a keyword search, such as Multiplexers or Switches
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
