A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the RF traces as short as possible and use 50-ohm impedance matching to minimize signal reflections.
Use a quarter-wavelength monopole antenna or a dipole antenna with a length of around 12.5mm. Ensure the antenna is placed at least 10mm away from the PCB edge and other components to minimize interference.
The maximum transmit power of HDSP-433G is +20 dBm (100 mW). However, the actual transmit power may vary depending on the specific application and regulatory requirements.
Use the device's built-in frequency synthesizer to generate the desired frequency hopping sequence. The synthesizer can be programmed using the SPI interface to switch between different frequency channels.
The latency of HDSP-433G is typically around 2-3 ms for transmitting and receiving data, depending on the specific application and data rate.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HDSP-433G Overview
Use the download button to access the HDSP-433G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HDSP-,
or try a keyword search, such as LED Displays
Suggested Parts
If you searched for HDSP-433G, you might also be interested in these parts:
