OTHER FIBER TYPES: 62.5/125; 100/140; HCS, OTHER OPTICAL OUTPUT POWER: 0.039 MBPS; 0.1 MBPS; 0.194 MBPS
Body Breadth:
12.7 mm
Body Height:
10.2 mm
Body Length or Diameter:
27.2 mm
Built-in Feature:
AMPLIFIER
Connection Type:
ST CONNECTOR
Data Rate:
5 Mbps
Emitter/Detector Type:
LED
Fiber Optic Device Type:
TRANSMITTER
Fiber Type:
62.5/125
JESD-609 Code:
e0
Mounting Feature:
THROUGH HOLE MOUNT
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Operating Wavelength-Max:
865 nm
Operating Wavelength-Min:
792 nm
Operating Wavelength-Nom:
820 nm
Optical Power Output-Nom:
0.0398 mW
Supply Voltage-Max:
2.09 V
Supply Voltage-Min:
1.48 V
Supply Voltage-Nom:
1.7 V
Surface Mount:
NO
Terminal Finish:
Tin/Lead (Sn/Pb)
Transmission Type:
DIGITAL
HFBR-1412 Frequently Asked Questions (FAQs)
Broadcom recommends a PCB layout with a solid ground plane, minimal trace lengths, and a 50-ohm transmission line impedance to ensure optimal performance and minimize signal reflections.
To ensure reliable operation in high-temperature environments, it is recommended to follow proper thermal management practices, such as providing adequate heat sinking, using thermal interface materials, and keeping the device within its specified operating temperature range.
The maximum cable length supported by the HFBR-1412 depends on the specific application and the type of fiber optic cable used. As a general guideline, Broadcom recommends keeping the cable length below 100 meters to ensure reliable operation.
To troubleshoot issues with the HFBR-1412, it is recommended to follow a systematic approach, including checking the power supply, verifying the fiber optic connection, and using optical test equipment to measure the signal power and quality.
The HFBR-1412 is designed to be compatible with other fiber optic transceiver modules that comply with the IEEE 802.3z standard. However, it is recommended to verify compatibility with specific modules before use.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HFBR-1412 Overview
Use the download button to access the HFBR-1412 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HFBR-,
or try a keyword search, such as Fiber Optic Transmitters
