ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206, 4 PIN
ECCN Code:
EAR99
Manufacturer:
Mini-Circuits
YTEOL:
7.09
Additional Feature:
TAPE AND REEL
Attenuation Frequency (+/- delta f)-Max:
510000 kHz
Attenuation Frequency (+/- delta f)-Min:
310000 kHz
Attenuation@Freq-Max:
40 dB
Attenuation@Freq-Min:
20 dB
Average Input Power:
7 W
Center or Cutoff Frequency (fo/fc):
1600 MHz
Filter Type:
CERAMIC HPF
Height:
0.94 mm
Input/Output Impedance:
50 OHM
Insertion Loss-Max:
3 dB
JESD-609 Code:
e3
Length:
3.2 mm
Mounting Type:
SURFACE MOUNT
Number of Sections-Max:
7
Number of Sections-Min:
7
Operating Temperature-Max:
100 °C
Operating Temperature-Min:
-55 °C
Terminal Finish:
Tin (Sn) - with Nickel (Ni) barrier
VSWR:
1.5
Width:
1.6 mm
HFCN-1600+ Frequently Asked Questions (FAQs)
A good rule of thumb is to use a solid ground plane on the bottom layer of the PCB, and to keep the signal traces as short and direct as possible. Also, make sure to decouple the power supply lines with capacitors and use a common ground point for all components.
To choose the right impedance matching network, you need to consider the input and output impedances of the HFCN-1600+, as well as the impedance of your specific application. You can use a Smith chart or an impedance matching calculator to find the optimal matching network.
The maximum power handling capability of the HFCN-1600+ is 1W. Exceeding this power limit can cause damage to the device or affect its performance.
To ensure proper biasing, make sure to follow the recommended biasing scheme outlined in the datasheet. This typically involves applying a voltage source to the VCC pin and a current source to the ISET pin. Also, make sure to use a stable voltage source and a low-noise power supply.
The typical noise figure of the HFCN-1600+ is around 3.5 dB. However, this can vary depending on the specific application and operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HFCN-1600+ Overview
Use the download button to access the HFCN-1600+ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HFCN-,
or try a keyword search, such as Ceramic Filters
About Mini-Circuits
Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.
