ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206-1, 6 PIN
Country Of Origin:
Taiwan
ECCN Code:
EAR99
Manufacturer:
Mini-Circuits
YTEOL:
7.24
Additional Feature:
TAPE AND REEL
Attenuation Frequency (+/- delta f)-Max:
900000 kHz
Attenuation Frequency (+/- delta f)-Min:
800000 kHz
Attenuation@Freq-Max:
30 dB
Attenuation@Freq-Min:
20 dB
Average Input Power:
7 W
Center or Cutoff Frequency (fo/fc):
4600 MHz
Filter Type:
CERAMIC HPF
Height:
0.89 mm
Input/Output Impedance:
50 OHM
Insertion Loss-Max:
3 dB
JESD-609 Code:
e3
Length:
3.2 mm
Mounting Type:
SURFACE MOUNT
Number of Sections-Max:
5
Number of Sections-Min:
5
Number of Terminals:
6
Operating Temperature-Max:
100 °C
Operating Temperature-Min:
-55 °C
Screening Level:
MIL-STD-202
Terminal Finish:
Tin (Sn) - with Nickel (Ni) barrier
VSWR:
1.5
Width:
1.6 mm
HFCN-4600+ Frequently Asked Questions (FAQs)
A good rule of thumb is to use a solid ground plane, keep the signal traces short and away from the edges of the board, and use a common ground point for the amplifier's ground pins. A 4-layer PCB with a dedicated ground plane is recommended.
The HFCN-4600+ requires a bias voltage of 5V and a bias current of 120mA. Ensure the voltage regulator is stable and can supply the required current. Also, use a low-ESR capacitor for decoupling and a ferrite bead for noise filtering.
The HFCN-4600+ can handle up to +10dBm of input power without damage. Exceeding this limit may cause permanent damage to the amplifier.
Use a combination of series and shunt resistors to match the amplifier's input and output impedance to the desired frequency range. Also, consider using a low-pass or band-pass filter to reject out-of-band noise and spurious signals.
The typical noise figure of the HFCN-4600+ is around 3.5dB. To minimize noise, ensure the amplifier is properly biased, use a low-noise voltage regulator, and keep the input and output traces short and shielded.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HFCN-4600+ Overview
Use the download button to access the HFCN-4600+ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HFCN-,
or try a keyword search, such as Ceramic Filters
About Mini-Circuits
Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.
