Please enter a minimum 3 letters or numbers
Technical Content
Part Image

HFCN-7150+ - Mini-Circuits

Description: Signal Conditioning LTCC High Pass Filter, 7900 - 11000 MHz

Download HFCN-7150+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
HFCN-7150+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
HFCN-7150+ - Mini-Circuits PCB footprint - Other - Other - HFCN-7150+-1
click to zoom
3D Models
HFCN-7150+ - Mini-Circuits - 3D model - Other - HFCN-7150+-1
click to zoom

HFCN-7150+ Details

  • Manufacturer Part Number:

    HFCN-7150+

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.24

  • Additional Feature:

    TAPE AND REEL

  • Attenuation Frequency (+/- delta f)-Max:

    2050000 kHz

  • Attenuation Frequency (+/- delta f)-Min:

    1000000 kHz

  • Attenuation@Freq-Max:

    30 dB

  • Attenuation@Freq-Min:

    20 dB

  • Average Input Power:

    6 W

  • Center or Cutoff Frequency (fo/fc):

    7150 MHz

  • Filter Type:

    CERAMIC HPF

  • Height:

    0.89 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    3 dB

  • JESD-609 Code:

    e3

  • Length:

    3.2 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    5

  • Number of Sections-Min:

    5

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -55 °C

  • Screening Level:

    MIL-STD-202

  • Terminal Finish:

    Tin (Sn) - with Nickel (Ni) barrier

  • VSWR:

    1.5

  • Width:

    1.6 mm

HFCN-7150+ Frequently Asked Questions (FAQs)

  • A good PCB layout and grounding scheme is crucial for optimal performance. It is recommended to use a multi-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. The device should be placed close to the edge of the board to minimize the length of the input and output traces. A via-stitched ground plane is also recommended to reduce the inductance of the ground path.
  • To ensure proper biasing, it is recommended to follow the recommended biasing circuit shown in the datasheet. The device requires a positive voltage supply (Vcc) and a negative voltage supply (Vee) to operate. The recommended biasing circuit includes a voltage regulator and a voltage divider to set the bias voltage. It is also important to ensure that the bias voltage is stable and noise-free.
  • The maximum power handling capability of the HFCN-7150+ is not explicitly stated in the datasheet. However, according to Mini-Circuits, the device can handle up to 1W of input power. It is recommended to derate the power handling capability based on the operating frequency and temperature to ensure reliable operation.
  • To troubleshoot common issues such as oscillations or instability, it is recommended to check the PCB layout and grounding scheme, as well as the biasing circuit. Ensure that the device is properly biased and that the input and output impedances are matched. Also, check for any signs of overheating or thermal runaway. If the issue persists, it may be necessary to consult with a Mini-Circuits application engineer or a qualified RF design expert.
  • The recommended operating conditions for the HFCN-7150+ include an operating temperature range of -40°C to +85°C, and a relative humidity of up to 95%. The device is also sensitive to electrostatic discharge (ESD), so proper ESD precautions should be taken during handling and assembly.

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

HFCN-7150+ Overview

Use the download button to access the HFCN-7150+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HFCN-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Suggested Parts

If you searched for HFCN-7150+, you might also be interested in these parts:
Part Number
HMC506LP4
EDC10-183+
AD8338ACPZ-R7
PMA2-123LN+
TLV70233DBVT
LFCN-113+
SIM-153+
AK4137EQ
SN74LVC157APW

Parts related to HFCN-7150+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑