A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from the power plane to minimize noise coupling.
Ensure the Vcc and Vee pins are decoupled with 100nF capacitors to ground, and the Iset pin is connected to a 10kΩ resistor to ground. Also, ensure the input and output pins are properly terminated.
The maximum input power is +10 dBm. Exceeding this may cause compression and distortion. Use an attenuator or a limiter to prevent damage.
Use a low-noise voltage regulator to power the device, and ensure the input and output impedances are matched. Also, use a high-quality, low-loss PCB material and minimize the number of vias and transitions.
Yes, the HMC565LC5 can be used in a push-pull configuration to improve linearity and reduce distortion. However, ensure the two devices are properly matched and biased for optimal performance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HMC565LC5 Overview
Use the download button to access the HMC565LC5 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HMC56,
or try a keyword search, such as RF/Microwave Amplifiers
About Analog Devices
Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries.
Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.
