Description:Fast trr, < 3.0ns; Low CD, < 2.0pF; Available in 8mm Tape and Reel; Pb-Free Package is Available; S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ101 Qualified and PPAP Capable
HALOGEN FREE AND ROHS COMPLIANT, CASE 419B-02, SC-88, 6 PIN
Pin Count:
6
Manufacturer Package Code:
419B-02
Country Of Origin:
Mainland China
ECCN Code:
EAR99
HTS Code:
8541.10.00.70
Factory Lead Time:
8 Weeks
Manufacturer:
onsemi
YTEOL:
6.1
Application:
ULTRA FAST RECOVERY
Breakdown Voltage-Min:
80 V
Configuration:
SEPARATE, 3 ELEMENTS
Diode Element Material:
SILICON
Diode Type:
RECTIFIER DIODE
Forward Voltage-Max (VF):
1.2 V
JESD-30 Code:
R-PDSO-G6
JESD-609 Code:
e3
Moisture Sensitivity Level:
1
Non-rep Pk Forward Current-Max:
1 A
Number of Elements:
3
Number of Phases:
1
Number of Terminals:
6
Operating Temperature-Max:
150 °C
Operating Temperature-Min:
-55 °C
Output Current-Max:
0.1 A
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
260
Power Dissipation-Max:
0.3 W
Qualification Status:
Not Qualified
Rep Pk Reverse Voltage-Max:
85 V
Reverse Current-Max:
0.1 µA
Reverse Recovery Time-Max:
0.003 µs
Reverse Test Voltage:
75 V
Surface Mount:
YES
Terminal Finish:
Matte Tin (Sn) - annealed
Terminal Form:
GULL WING
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
HN2D02FUTW1T1G Frequently Asked Questions (FAQs)
A good PCB layout for the HN2D02FUTW1T1G involves keeping the input traces as short as possible, using a solid ground plane, and minimizing vias and bends. It's also recommended to use a common-mode choke or a ferrite bead to filter out high-frequency noise.
To ensure signal integrity, use a controlled impedance PCB design, maintain a consistent signal return path, and minimize signal reflections. Also, consider using a termination resistor at the receiver end to match the impedance of the transmission line.
The maximum cable length supported by the HN2D02FUTW1T1G depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 10 meters (33 feet) at data rates up to 1 Gbps.
To minimize EMI, use a shielded cable, keep the device away from high-frequency sources, and use a common-mode choke or ferrite bead to filter out noise. Additionally, ensure good PCB layout practices, such as keeping the device's input traces away from noisy signals.
The recommended power-up sequence for the HN2D02FUTW1T1G is to apply the power supply (VCC) before applying the input signals. This ensures that the device is properly biased and configured before receiving data.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HN2D02FUTW1T1G Overview
Use the download button to access the HN2D02FUTW1T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HN2D0,
or try a keyword search, such as Rectifier Diodes
