XP Power recommends a PCB layout with a large copper area connected to the module's thermal pad to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
To ensure reliable start-up in high-temperature environments, XP Power recommends using a soft-start circuit or a ramp-up voltage supply to reduce the inrush current during start-up. This helps to prevent the module from shutting down due to excessive current draw.
The maximum capacitance on the output of the IH2405D is 2200uF. Exceeding this value may cause the module to oscillate or become unstable. It's recommended to use a capacitance value that is less than or equal to 2200uF to ensure stable operation.
Yes, the IH2405D can be used in a redundant configuration to achieve high reliability and availability. However, it's essential to ensure that the modules are properly synchronized and that the system is designed to handle the increased power consumption and heat generation.
XP Power recommends using a fuse with a rating of 5A or less to protect the module from input overcurrent conditions. The fuse should be located as close to the input of the module as possible to minimize the risk of damage due to input overvoltage or overcurrent.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
IH2405D Overview
Use the download button to access the IH2405D 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like IH240,
or try a keyword search, such as Power Supply Modules
