The recommended operating temperature range for the IN-S42BTR is -20°C to 70°C, while the storage temperature range is -30°C to 80°C.
The IN-S42BTR display module uses a 4-wire SPI interface for communication, with a maximum clock frequency of 20 MHz.
The typical power consumption of the IN-S42BTR is around 200-250 mW, depending on the display mode and brightness setting.
No, the IN-S42BTR display module is not compatible with 5V logic. It operates at a supply voltage of 3.3V, and the input logic levels are also 3.3V.
The brightness of the IN-S42BTR display can be adjusted by sending a specific command to the display controller, or by using an external PWM signal to control the backlight.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
IN-S42BTR Overview
Use the download button to access the IN-S42BTR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like IN-S4,
or try a keyword search, such as Visible LEDs
