The maximum voltage that can be applied to the input pins is 26.4V, which is the absolute maximum rating. However, for normal operation, the input voltage should be limited to the supply voltage (VCC) + 0.3V to ensure accurate measurements.
The gain error of the INA281A4IDBVT can be calculated using the formula: Gain Error (%) = (VOUT / (VIN x GAIN)) x 100, where VOUT is the output voltage, VIN is the input voltage, and GAIN is the gain setting (1, 2, 4, or 8).
The INA281A4IDBVT's accuracy is affected by temperature, with a typical temperature coefficient of ±50 ppm/°C for the gain error and ±10 ppm/°C for the offset voltage. This means that the device's accuracy will degrade as the temperature deviates from the nominal operating temperature of 25°C.
The INA281A4IDBVT is designed for low-frequency applications, with a bandwidth of 35 kHz. While it can be used for higher-frequency applications, the device's accuracy and noise performance may degrade significantly above 10 kHz. For high-frequency applications, a different device may be more suitable.
To minimize noise and ensure accurate measurements, it is recommended to follow good PCB layout practices, such as separating analog and digital grounds, using a solid ground plane, and keeping the input and output traces short and shielded. Additionally, the device's input pins should be connected to a low-impedance source, and the output pin should be connected to a high-impedance load.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
INA281A4IDBVT Overview
Use the download button to access the INA281A4IDBVT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like INA28,
or try a keyword search, such as Operational Amplifiers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
