The maximum operating temperature of the IPA60R180P7XKSA1 is 175°C, as specified in the datasheet.
To ensure proper cooling, a heat sink with a thermal resistance of less than 1 K/W is recommended. Additionally, the device should be mounted on a PCB with a thermal pad and thermal vias to dissipate heat efficiently.
The maximum current rating of the IPA60R180P7XKSA1 is 60A, as specified in the datasheet. However, this rating is dependent on the device's operating temperature and the PCB's thermal design.
To protect the IPA60R180P7XKSA1 from overvoltage and overcurrent, a suitable voltage regulator and current limiter should be used. Additionally, a fuse or circuit breaker can be used to protect the device from excessive current.
The recommended gate drive voltage for the IPA60R180P7XKSA1 is between 10V and 15V, as specified in the datasheet. A higher gate drive voltage can reduce the device's on-state resistance, but may also increase power consumption.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IPA60R180P7XKSA1 Overview
Use the download button to access the IPA60R180P7XKSA1 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like IPA60,
or try a keyword search, such as Power Field-Effect Transistors