Part Image

IPR3SAD1 - Apem

Description: --

Download IPR3SAD1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
IPR3SAD1 - Apem  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

IPR3SAD1 Details

  • Manufacturer Part Number:

    IPR3SAD1

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    UK

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.50.90.33

  • Manufacturer:

    APEM Inc

  • YTEOL:

    8

  • Actuator Type:

    ROUND CURVED TYPE

  • Additional Feature:

    SEALING: ENVIRONMENTALLY SEALED

  • Body Height:

    20.6 mm

  • Body Length or Diameter:

    12 mm

  • Contact Current(DC)-Max:

    4 A

  • Contact (DC) Max Rating R Load:

    4A@12VDC

  • Contact Voltage(DC)-Max:

    12 V

  • Electrical Life:

    200000 Cycle(s)

  • Illumination:

    NON-ILLUMINATED

  • Mounting Feature:

    PANEL MOUNT

  • Operating Force-Max:

    10 N

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Sealing:

    CORROSION PROOF; EPOXY TERMINAL SEALED; IP67

  • Surface Mount:

    NO

  • Switch Action:

    LATCHED

  • Switch Function:

    SPST

  • Switch Type:

    PUSHBUTTON SWITCH

  • Termination Type:

    SOLDER

IPR3SAD1 Frequently Asked Questions (FAQs)

  • APEM recommends a 4-layer PCB with a solid ground plane, and a separate power plane for the IPR3SAD1. Keep the input and output traces separate and as short as possible to minimize noise and EMI.
  • APEM recommends a heat sink with a thermal resistance of 10°C/W or lower. Ensure good airflow around the device, and consider using a thermal interface material to improve heat transfer.
  • APEM recommends limiting voltage transients to 10% of the nominal input voltage to prevent damage to the device. Use a TVS diode or a voltage clamp to protect the IPR3SAD1 from voltage spikes.
  • Yes, the IPR3SAD1 is designed for high-reliability applications. APEM provides a failure modes and effects analysis (FMEA) report and a safety manual to support safety-critical applications. Contact APEM for more information.
  • Start by checking the input voltage, output voltage, and current. Verify the PCB layout and component placement. Use an oscilloscope to check for noise and oscillations. Consult the APEM application note and contact APEM support if necessary.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

IPR3SAD1 Overview

Use the download button to access the IPR3SAD1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like IPR3S, or try a keyword search, such as Pushbutton Switches

Parts related to IPR3SAD1

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview