Infineon provides a recommended PCB layout in their application note AN-1145, which includes guidelines for thermal vias, copper thickness, and component placement to minimize thermal resistance and ensure reliable operation.
The input capacitor selection depends on the input voltage, ripple current, and ESR requirements. Infineon recommends using a low-ESR ceramic capacitor with a minimum capacitance of 10uF and a voltage rating of at least 1.5 times the maximum input voltage. Refer to the application note AN-1145 for more details.
The maximum allowed voltage drop across the internal FETs is not explicitly stated in the datasheet. However, according to Infineon's application note AN-1145, the voltage drop should be limited to 1V or less to ensure reliable operation and minimize power losses.
The IR25603PBF is rated for operation up to 150°C junction temperature. However, the device's performance and reliability may degrade at high temperatures. It's recommended to consult Infineon's application note AN-1145 for thermal management guidelines and to ensure the device is operated within its specified temperature range.
To troubleshoot overcurrent protection issues, check the input voltage, output current, and sense resistor values. Ensure that the sense resistor is correctly connected and that the output current is within the specified range. Consult Infineon's application note AN-1145 for more detailed troubleshooting guidelines.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IR25603PBF Overview
Use the download button to access the IR25603PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IR256,
or try a keyword search, such as Peripheral Drivers
