Part Image

ISL3172EIBZ - Renesas Electronics

Description: The Renesas ISL317xE are ±15kV IEC61000 ESD protected, 3. 3V powered single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification's 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are r

Download ISL3172EIBZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL3172EIBZ - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8-15
click to zoom
3D Models
ISL3172EIBZ - Renesas Electronics  - 3D model - Small Outline Packages - M8-15
click to zoom

ISL3172EIBZ Details

  • Manufacturer Part Number:

    ISL3172EIBZ

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOICN

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.15

  • Country Of Origin:

    Mainland China, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    120 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.8 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1500 ns

  • Width:

    3.9 mm

ISL3172EIBZ Frequently Asked Questions (FAQs)

  • A good PCB layout for the ISL3172EIBZ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure proper power-up and power-down of the ISL3172EIBZ, make sure to follow the recommended power-up sequence, which is to apply VCC first, followed by VDD. During power-down, remove VDD first, followed by VCC. Also, ensure that the input voltage ramps up and down slowly to prevent latch-up.
  • The maximum capacitance value that can be used with the ISL3172EIBZ is 10uF. Using a capacitance value higher than this may cause instability and affect the device's performance.
  • To handle ESD protection for the ISL3172EIBZ, use a TVS (Transient Voltage Suppressor) diode or a Zener diode with a voltage rating higher than the maximum voltage rating of the device. Also, ensure that the PCB layout is designed to minimize the distance between the device and the ESD protection components.
  • The recommended operating temperature range for the ISL3172EIBZ is -40°C to +85°C. Operating the device outside this range may affect its performance and reliability.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL3172EIBZ Overview

Use the download button to access the ISL3172EIBZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL31, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL3172EIBZ

Showing 0 results

ISL3172EIBZ Alternates

Showing results

Image Part Number Model
Part Image ISL3172EIBZ-T Intersil Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL3172EIBZ Intersil Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8