Description:The ISL3179E and ISL3180E are high ESD protected, 3. 3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each device has low bus currents (+220μA/-150μA), so they present a “1/5 unit load” to the RS-485 bus. This allows up to 160 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters. Receiver (Rx) inputs feature a “full fail-safe” design, which ensures a logic high Rx output if Rx inpu
The recommended PCB layout for optimal performance involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals, and to minimize the length of the traces to reduce noise and EMI.
To ensure reliable operation over the entire operating temperature range, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and keeping the device away from heat sources. Additionally, it's recommended to derate the device's power consumption and operating frequency at higher temperatures.
Using a lower supply voltage than the recommended 3.3V may result in reduced performance, increased power consumption, and potential reliability issues. Using a higher supply voltage may result in increased power consumption, heat generation, and potential damage to the device. It's recommended to operate the device within the specified supply voltage range for optimal performance and reliability.
To troubleshoot issues with the device's I2C interface, start by verifying the I2C bus voltage levels, clock frequency, and signal integrity. Check for bus contention, incorrect slave addressing, and data transmission errors. Use an oscilloscope or logic analyzer to monitor the I2C bus signals and identify any anomalies. Consult the datasheet and application notes for specific troubleshooting guidelines.
The ISL3179EFBZ-T has built-in ESD protection diodes on all pins, which can withstand up to 2kV of ESD voltage. To prevent latch-up, it's recommended to follow proper PCB design practices, such as using a solid ground plane, minimizing trace lengths, and avoiding parallel signal paths. Additionally, it's essential to follow proper handling and storage procedures to prevent ESD damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL3179EFBZ-T Overview
Use the download button to access the ISL3179EFBZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL31,
or try a keyword search, such as Line Driver or Receivers
