Description:The ISL3179E and ISL3180E are high ESD protected, 3. 3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each device has low bus currents (+220μA/-150μA), so they present a “1/5 unit load” to the RS-485 bus. This allows up to 160 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters. Receiver (Rx) inputs feature a “full fail-safe” design, which ensures a logic high Rx output if Rx inpu
A good PCB layout for the ISL3179EIBZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper power-up and power-down of the ISL3179EIBZ-T, it's recommended to follow a specific power-up sequence, where the analog power supply (VCC) is powered up before the digital power supply (VDD). During power-down, the sequence should be reversed. Additionally, it's recommended to use a power-on reset (POR) circuit to ensure the device is properly reset during power-up.
The ISL3179EIBZ-T has a maximum junction temperature of 150°C. To ensure reliable operation, it's recommended to keep the device junction temperature below 125°C. This can be achieved by using a heat sink, improving air flow, and reducing the power consumption of the device.
To troubleshoot issues with the ISL3179EIBZ-T, it's recommended to follow a systematic approach, starting with a visual inspection of the PCB and device, followed by checking the power supplies, clock signals, and data signals. Additionally, using oscilloscopes and logic analyzers can help identify issues with the device's operation.
The ISL3179EIBZ-T has built-in ESD protection, but it's still recommended to take precautions during handling and assembly to prevent damage. This includes using ESD-safe materials, grounding wrist straps, and using anti-static bags and tubes.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL3179EIBZ-T Overview
Use the download button to access the ISL3179EIBZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL31,
or try a keyword search, such as Line Driver or Receivers
