Part Image

ISL32452EIBZ-T - Renesas Electronics

Description: The ISL3245xE are 3. 3V to 5V powered, fault protected, extended Common-Mode Range (CMR) differential transceivers for balanced communication. The RS-485 bus pins (driver outputs and receiver inputs) are protected against overvoltages up to ±60V, and against ±15kV ESD strikes. These transceivers operate in environments with common-mode voltages up to ±20V (exceeds the RS-485 requirement), making this RS-485 family one of the most robust on the market. The transmitters are RS-485 compliant with VCC ≥ 4. 5V a

Download ISL32452EIBZ-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL32452EIBZ-T - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8.118 8 LEAD MINI SMALL OUTLINE PACKAGE
click to zoom
3D Models
ISL32452EIBZ-T - Renesas Electronics  - 3D model - Small Outline Packages - M8.118 8 LEAD MINI SMALL OUTLINE PACKAGE
click to zoom

ISL32452EIBZ-T Details

  • Manufacturer Part Number:

    ISL32452EIBZ-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOICN

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.15

  • Country Of Origin:

    Malaysia, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485; EIA-422

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.1 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.005 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    325 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    4.5 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1000 ns

  • Width:

    3.9 mm

ISL32452EIBZ-T Frequently Asked Questions (FAQs)

  • A good PCB layout for the ISL32452EIBZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing trace lengths and widths to reduce noise and EMI. A 4-layer PCB with a dedicated analog layer is recommended.
  • To ensure reliable communication in noisy environments, use a shielded cable, keep the cable length as short as possible, and use a common-mode choke or ferrite bead to filter out high-frequency noise. Additionally, consider using a differential signal transmission scheme and implementing error-checking mechanisms in your protocol.
  • The maximum cable length supported by the ISL32452EIBZ-T depends on the specific application and the type of cable used. As a general guideline, the device can support cable lengths up to 100 meters at data rates up to 100 Mbps. However, it's recommended to consult the datasheet and application notes for specific guidance on cable length and data rate trade-offs.
  • To ensure proper power-up and power-down sequencing, follow the recommended power-up sequence: VCC, then VDD, and finally the digital supply. During power-down, reverse this sequence. Additionally, ensure that the power supplies are stable and within the recommended voltage ranges before enabling the device.
  • The ISL32452EIBZ-T has a maximum junction temperature of 150°C. To ensure reliable operation, keep the device within the recommended operating temperature range (–40°C to 85°C) and provide adequate heat sinking, such as a thermal pad or heat sink, to dissipate heat generated by the device.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL32452EIBZ-T Overview

Use the download button to access the ISL32452EIBZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL32452EIBZ-T

Showing 0 results

ISL32452EIBZ-T Alternates

Showing results

Image Part Number Model
Part Image ISL32452EIBZ-T7A Renesas Electronics Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL32452EIBZ Renesas Electronics Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL32452EIBZ-T13 Renesas Electronics Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8