Part Image

ISL32495EIBZ-T7A - Renesas Electronics

Description: The ISL32490E, ISL32492E, ISL32493E, ISL32495E, ISL32496E, and ISL32498E are fault protected, 5V powered, differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are fault protected up to ±60V and are protected against ±16. 5kV ESD strikes without latch-up. Additionally, the extended Common-Mode Range (CMR) allows these transceivers to operate in environments with common-mode voltages up to ±25V (>2x t

Download ISL32495EIBZ-T7A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL32495EIBZ-T7A - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8.15-ren4
click to zoom
3D Models
ISL32495EIBZ-T7A - Renesas Electronics  - 3D model - Small Outline Packages - M8.15-ren4
click to zoom

ISL32495EIBZ-T7A Details

  • Manufacturer Part Number:

    ISL32495EIBZ-T7A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOICN

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.15

  • Country Of Origin:

    Malaysia, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    6

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00015 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485; EIA-422

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.022 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    150 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    4.5 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    4.5 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    350 ns

  • Width:

    3.9 mm

ISL32495EIBZ-T7A Frequently Asked Questions (FAQs)

  • A good PCB layout for the ISL32495EIBZ-T7A involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing trace lengths and widths to reduce noise and EMI. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • To ensure reliable communication in noisy environments, use a shielded cable, keep the cable length as short as possible, and use a common mode choke or ferrite bead to filter out high-frequency noise. Additionally, consider using a differential signal transmission scheme and implementing error-checking mechanisms in your protocol.
  • The maximum cable length supported by the ISL32495EIBZ-T7A depends on the specific application and the type of cable used. As a general guideline, the device can support cable lengths up to 100 meters at a data rate of 100 Mbps. However, it's recommended to consult the datasheet and perform signal integrity simulations to determine the maximum cable length for your specific application.
  • The ISL32495EIBZ-T7A has built-in fault detection and hot-swapping capabilities. To handle hot-swapping, use the device's built-in hot-swap detection circuitry and implement a hot-swap detection algorithm in your firmware. For fault detection, use the device's fault detection pins and implement a fault detection algorithm in your firmware.
  • The ISL32495EIBZ-T7A has a maximum junction temperature of 150°C. To ensure reliable operation, keep the device's junction temperature below 125°C. Use thermal vias, thermal pads, and heat sinks as needed to dissipate heat. Additionally, ensure good airflow and avoid blocking airflow around the device.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL32495EIBZ-T7A Overview

Use the download button to access the ISL32495EIBZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL32495EIBZ-T7A

Showing 0 results

ISL32495EIBZ-T7A Alternates

Showing results

Image Part Number Model
Part Image ISL32495EIBZ-T Renesas Electronics Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL32495EIBZ Renesas Electronics Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL32495E Renesas Electronics Corporation

Line Transceiver

Part Image ISL32495EIBZ Intersil Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8