Part Image

ISL3283EFHZ-T7A - Renesas Electronics

Description: The Intersil ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E, ISL3285E are ±16. 5kV IEC61000 ESD Protected, 3. 0V to 5. 5V powered, single receivers that meet both the RS-485 and RS-422 standards for balanced communication. These receivers have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 receivers on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. Receiver inputs feature a “

Download ISL3283EFHZ-T7A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL3283EFHZ-T7A - Renesas Electronics PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - P6.064-ren1
click to zoom
3D Models
ISL3283EFHZ-T7A - Renesas Electronics  - 3D model - SOT23 (6-Pin) - P6.064-ren1
click to zoom

ISL3283EFHZ-T7A Details

  • Manufacturer Part Number:

    ISL3283EFHZ-T7A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT23

  • Package Description:

    SOT-23, 6 PIN

  • Pin Count:

    6

  • Manufacturer Package Code:

    P6.064

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7

  • High Level Input Current-Max:

    0.00125 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    EIA-485; EIA-422

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.75 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    60 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    0.5 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.6 mm

ISL3283EFHZ-T7A Frequently Asked Questions (FAQs)

  • A good PCB layout for the ISL3283EFHZ-T7A involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the transmission lines. It's also recommended to place the device close to the signal source and use a common mode choke to reduce EMI.
  • To ensure proper termination, use a 50Ω resistor in series with the transmission line, and a 50Ω terminator at the receiving end. This will help to reduce signal reflections and ensure signal integrity.
  • The recommended power-up sequence is to apply VCC first, followed by VEE, and then the input signals. This ensures that the device powers up correctly and minimizes the risk of latch-up or damage.
  • To handle thermal management, ensure good airflow around the device, use a heat sink if necessary, and avoid blocking the airflow around the device. The device's thermal pad should be connected to a solid ground plane to help dissipate heat.
  • The recommended input signal amplitude is between 100mV and 1.4V, and the frequency range is up to 3.2GHz. Signals outside of this range may not be properly transmitted or received.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL3283EFHZ-T7A Overview

Use the download button to access the ISL3283EFHZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL3283EFHZ-T7A

Showing 0 results

ISL3283EFHZ-T7A Alternates

Showing results

Image Part Number Model
Part Image ISL3283EIHZ-T Renesas Electronics Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6

Part Image ISL3283EFHZ-T Renesas Electronics Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6

Part Image ISL3283EFHZ-T Intersil Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6

Part Image ISL3283EIHZ-T Intersil Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6