Description:The ISL6614A integrates two ISL6613A MOSFET drivers and is specifically designed to drive two Channel MOSFETs in a synchronous rectified buck converter topology. These drivers combined with HIP63xx or ISL65xx Multiphase Buck PWM controllers and N-Channel MOSFETs form complete core voltage regulator solutions for advanced microprocessors. The ISL6614A drives both the upper and lower gates simultaneously over a range from 5V to 12V. This drive voltage provides the flexibility necessary to optimize application
The recommended PCB layout for the ISL6614ACBZ involves placing the input capacitors close to the VIN pin, using a solid ground plane, and keeping the high-frequency switching nodes (e.g., LX and SW nodes) away from sensitive analog nodes. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
To select the right inductor for the ISL6614ACBZ, consider the following factors: inductance value, DC resistance, saturation current, and core material. A good starting point is to choose an inductor with an inductance value between 1uH to 10uH, a DC resistance less than 100mΩ, and a saturation current greater than the peak current of the converter. Additionally, consider using a shielded inductor to reduce EMI.
The maximum operating temperature range for the ISL6614ACBZ is -40°C to +125°C. However, the device's performance and reliability may degrade at temperatures above 85°C. It's recommended to ensure proper thermal design and heat dissipation to maintain a safe operating temperature.
To troubleshoot common issues with the ISL6614ACBZ, start by checking the PCB layout and component selection to ensure they meet the recommended guidelines. Verify that the input and output capacitors are properly selected and placed. Check for any signs of overheating, and ensure that the device is properly soldered and connected. Use an oscilloscope to measure the switching waveforms and identify any signs of oscillation or instability. Consult the datasheet and application notes for troubleshooting guides and tips.
Yes, the ISL6614ACBZ can be used in a synchronous rectification configuration. In fact, the device is designed to support synchronous rectification, which can improve efficiency and reduce power losses. To implement synchronous rectification, connect the SR pin to the drain of the synchronous rectifier MOSFET, and ensure that the MOSFET is properly selected and driven.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL6614ACBZ Overview
Use the download button to access the ISL6614ACBZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL66,
or try a keyword search, such as MOSFET Drivers
