Part Image

ISL8483EIBZ-T - Renesas Electronics

Description: The ISL8483E and ISL8485E are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive devices, this Renesas family is specified for 10% tolerance supplies (4. 5V to 5. 5V). The ISL8483E uses slew rate limited drivers that reduce EMI and minimize reflections from improperly terminated transmission lines or unterminated stubs in

Download ISL8483EIBZ-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL8483EIBZ-T - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8-15
click to zoom
3D Models
ISL8483EIBZ-T - Renesas Electronics  - 3D model - Small Outline Packages - M8-15
click to zoom

ISL8483EIBZ-T Details

  • Manufacturer Part Number:

    ISL8483EIBZ-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOICN

  • Package Description:

    SOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.15

  • Country Of Origin:

    Malaysia, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    2000 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.9 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    4.5 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    2000 ns

  • Width:

    3.9 mm

ISL8483EIBZ-T Frequently Asked Questions (FAQs)

  • A good PCB layout for the ISL8483EIBZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper powering and decoupling of the ISL8483EIBZ-T, use a high-quality decoupling capacitor (e.g., 10uF ceramic capacitor) as close as possible to the device's power pins. Additionally, use a low-ESR capacitor (e.g., 1uF ceramic capacitor) to filter the output voltage.
  • The ISL8483EIBZ-T can achieve data rates of up to 100 Mbps, but the actual data rate may vary depending on the specific application, PCB layout, and cable quality.
  • To troubleshoot issues with the ISL8483EIBZ-T, start by checking the power supply voltage, decoupling, and PCB layout. Use an oscilloscope to verify the signal integrity and check for noise or distortion. Also, review the device's configuration and programming to ensure it is set up correctly.
  • The ISL8483EIBZ-T is rated for operation from -40°C to +85°C, but it's essential to consider the specific environmental requirements of your application. For harsh environments, consider using a device with a wider operating temperature range or additional protection mechanisms, such as conformal coating or hermetic sealing.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL8483EIBZ-T Overview

Use the download button to access the ISL8483EIBZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL84, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL8483EIBZ-T

Showing 0 results

ISL8483EIBZ-T Alternates

Showing results

Image Part Number Model
Part Image ISL8483EIB-T Rochester Electronics LLC

LINE TRANSCEIVER, PDSO8, PLASTIC, MS-012AA, SOIC-8

Part Image ISL8483EIBZ-T7A Renesas Electronics Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL8483EIB-T Intersil Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8