XP Power recommends a PCB layout with a large copper area connected to the module's thermal pad to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliable start-up in high-temperature environments, XP Power recommends using a soft-start circuit to limit the inrush current during power-up. This can be achieved using an NTC thermistor or a soft-start IC. Additionally, the module's input voltage should be ramped up slowly to prevent high inrush currents.
The maximum capacitance on the output of the JCM3048S05 is 2200uF. Exceeding this value may cause the module to oscillate or become unstable. It's recommended to use a capacitance value that is less than or equal to 2200uF to ensure stable operation.
Yes, the JCM3048S05 can be used in a redundant configuration to achieve high reliability and availability. However, XP Power recommends using a diode ORing circuit or a redundancy module to ensure that the outputs are properly isolated and synchronized.
XP Power recommends using a fuse with a rating of 5A or less to protect the module from input overcurrent conditions. The fuse should be located as close to the input of the module as possible to ensure effective protection.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
JCM3048S05 Overview
Use the download button to access the JCM3048S05 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like JCM30,
or try a keyword search, such as Power Supply Modules
