A good PCB layout for the LC03-3.3 involves keeping the input and output tracks as short as possible, using a solid ground plane, and minimizing the distance between the device and the antenna. It's also recommended to use a 50Ω microstrip line to match the impedance of the device.
The LC03-3.3 requires a 3.3V power supply, and it's essential to ensure that the voltage supply is stable and noise-free. A decoupling capacitor of 10nF to 100nF should be placed close to the device to filter out any noise. Additionally, the device should be biased through a resistor divider network to ensure the correct voltage is applied to the VCC pin.
The maximum transmit power of the LC03-3.3 is +20dBm. The transmit power can be adjusted by modifying the value of the resistor connected to the RXPIN pin. A higher resistance value will result in a lower transmit power, while a lower resistance value will result in a higher transmit power.
The LC03-3.3 has a built-in low-power mode that can be enabled by pulling the SHDN pin low. In this mode, the device consumes very low current, making it suitable for battery-powered applications. Additionally, the device can be put into a sleep mode by sending a specific command to the device through the SPI interface.
The LC03-3.3 supports a maximum data rate of 300kbps. The data rate can be configured by modifying the value of the registers through the SPI interface. The device supports various data rates, including 1kbps, 10kbps, 50kbps, and 300kbps, and the desired data rate can be selected by writing the appropriate value to the relevant registers.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LC03-3.3 Overview
Use the download button to access the LC03-3.3 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LC03-,
or try a keyword search, such as Transient Suppressors
