ETI Systems recommends a 4-layer PCB with a solid ground plane, and a separate power plane for the input and output. The input and output tracks should be kept as short as possible and away from the switching node to minimize EMI.
To ensure reliability in high-temperature applications, it is recommended to derate the output power of the LCP12A-100-10K according to the temperature derating curve provided in the datasheet. Additionally, ensure good airflow around the device and use a heat sink if necessary.
The maximum allowable voltage deviation on the input of the LCP12A-100-10K is ±10% of the nominal input voltage. Exceeding this limit may affect the performance and reliability of the device.
Yes, the LCP12A-100-10K can be used in a redundant or parallel configuration to achieve higher power output or to improve system reliability. However, it is recommended to consult with ETI Systems or a qualified engineer to ensure proper design and implementation.
The typical MTBF of the LCP12A-100-10K is >1 million hours, calculated according to MIL-HDBK-217F. However, the actual MTBF may vary depending on the application, operating conditions, and other factors.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LCP12A-100-10K Overview
Use the download button to access the LCP12A-100-10K 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LCP12,
or try a keyword search, such as Variable Resistors
