The recommended power-on sequence is to first apply power to the VCC pin, followed by the enable pin (EN), and then the reset pin (RST). This sequence ensures proper initialization and prevents damage to the module.
The UART interface can be configured using the AT command set. The default baud rate is 9600, but it can be changed using the AT+IPR command. The module also supports flow control, which can be enabled or disabled using the AT+IFC command.
The typical current consumption of the module is around 30-40 mA during continuous transmission, and around 10-20 mA during idle mode. However, this can vary depending on the specific use case and configuration.
The module supports antenna diversity, which can be implemented by connecting two antennas to the RF1 and RF2 pins. The module will automatically switch between the two antennas based on signal strength and quality.
The maximum operating temperature range for the module is -40°C to +85°C. However, it's recommended to operate the module within the -20°C to +70°C range for optimal performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LEXI-R10801D-00B Overview
Use the download button to access the LEXI-R10801D-00B 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LEXI-,
or try a keyword search, such as Other uPs/uCs/Peripheral ICs
About u-blox
u-blox is a Swiss company, specializing in advanced positioning and wireless communication technologies. It provides high-performance GNSS (Global Navigation Satellite System) and cellular communication modules, chips, and software for a wide range of industries including automotive, industrial, and consumer electronics. Known for its innovation and reliability, u-blox's products support multiple satellite systems and wireless standards, enabling precise positioning and robust connectivity for applications.
