Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LFCG-2500+ - Mini-Circuits

Description: Signal Conditioning LOW PASS FLTR / SURF MT / RoHS

Download LFCG-2500+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LFCG-2500+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
LFCG-2500+ - Mini-Circuits PCB footprint - Other - Other - LFCG-2500+-1
click to zoom
3D Models
LFCG-2500+ - Mini-Circuits - 3D model - Other - LFCG-2500+-1
click to zoom

LFCG-2500+ Details

  • Manufacturer Part Number:

    LFCG-2500+

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    EIA STD PACKAGE SIZE 0805, LTCC, 8 PIN

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.29

  • Average Input Power:

    6 W

  • Center or Cutoff Frequency (fo/fc):

    2870 MHz

  • Filter Type:

    CERAMIC LPF

  • Height:

    0.95 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    2.2 dB

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Terminal Finish:

    Tin (Sn) - with Nickel (Ni) barrier

  • VSWR:

    1.4

  • Width:

    1.25 mm

LFCG-2500+ Frequently Asked Questions (FAQs)

  • A multi-layer PCB with a solid ground plane and a separate power plane is recommended. Use a star-grounding scheme with a single point ground connection to the case. Keep the signal traces short and away from the power plane.
  • Apply a DC voltage of +12V to +15V to the VCC pin, and ensure the VEE pin is connected to a quiet analog ground. Use a low-ESR capacitor (e.g., 10uF) between VCC and VEE for decoupling.
  • The maximum input power is +10 dBm (10 mW). Exceeding this may cause compression or damage to the device.
  • Use the internal bias circuitry to adjust the operating point. For example, to optimize for 2.4 GHz, set the bias voltage to around 3.5V. Consult the datasheet for specific bias voltage vs. frequency curves.
  • The recommended operating temperature range is -40°C to +85°C. However, the device can operate up to +100°C with reduced performance and reliability.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LFCG-2500+ Overview

Use the download button to access the LFCG-2500+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LFCG-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to LFCG-2500+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑