The recommended power-on sequence is to power up the VDDIO pin first, followed by the VDD pin. This ensures that the internal voltage regulators are properly initialized.
The self-test feature can be enabled by setting the ST bits in the CTRL_REG3 register. The device will then perform an internal self-test and report the results in the STATUS_REG register. Note that the self-test feature should only be used during device initialization and not during normal operation.
The temperature sensor is used to compensate for temperature-related drift in the magnetometer readings. The temperature data can be read from the TEMP_OUT_H and TEMP_OUT_L registers and used to correct the magnetometer readings.
The raw sensor data is in 16-bit two's complement format and represents the magnetic field strength in LSB/Gauss. To calculate the magnetic field strength, you need to multiply the raw data by the sensitivity value (typically 1.5 LSB/mG) and apply any necessary offset corrections.
The recommended I2C clock frequency is up to 400 kHz, but the device can operate up to 1 MHz. However, higher clock frequencies may increase power consumption and reduce noise immunity.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LIS2MDL Overview
Use the download button to access the LIS2MDL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LIS2M,
or try a keyword search, such as Other Sensors/Transducers
About STMicroelectronics
STMicroelectronics (ST) is a global semiconductor company that designs, manufactures, and markets a broad range of integrated circuits (ICs), discrete devices, and other electronic components.
STMicroelectronics offers a diverse portfolio of semiconductor products covering a wide range of applications and industries. Their product categories include microcontrollers, analog and mixed-signal ICs, MEMS (Micro-Electro-Mechanical Systems) sensors, power management ICs, RF (Radio Frequency) transceivers, aut
