The maximum operating voltage for the LM339FV-E2 is 36V.
To ensure stability, a bypass capacitor (typically 0.1uF to 1uF) should be connected between the VCC pin and GND, and a pull-up resistor (typically 1kΩ to 10kΩ) should be connected between the output pin and VCC.
The response time of the LM339FV-E2 is typically around 1.3μs, but this can vary depending on the specific application and operating conditions.
While the LM339FV-E2 can be used as an oscillator, it's not recommended as it's not designed for this purpose. The comparator is optimized for high-speed comparison, not oscillation.
The LM339FV-E2 has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures when handling the device, such as using an anti-static wrist strap or mat.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LM339FV-E2 Overview
Use the download button to access the LM339FV-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM339,
or try a keyword search, such as Comparators