Part Image

LM358D - Texas Instruments

Description: LM358D, Dual Operational Amplifier 0.7MHz 5 to 28V, 8-Pin SOIC

Download LM358D Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LM358D - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D
click to zoom
3D Models
LM358D - Texas Instruments  - 3D model - Small Outline Packages - D
click to zoom

LM358D Details

  • Manufacturer Part Number:

    LM358D

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    1989-03-01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.5 µA

  • Bias Current-Max (IIB) @25C:

    0.15 µA

  • Common-mode Reject Ratio-Min:

    65 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.05 µA

  • Input Offset Voltage-Max:

    7000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -16 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.24

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    0.3 V/us

  • Supply Current-Max:

    2 mA

  • Supply Voltage Limit-Max:

    16 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    700

  • Voltage Gain-Min:

    15000

  • Wideband:

    NO

  • Width:

    3.9 mm

LM358D Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the LM358D is 670mW, which is calculated based on the maximum junction temperature (Tj) of 150°C and the thermal resistance (RθJA) of 125°C/W.
  • While the LM358D can be used as a comparator, it's not the best choice due to its relatively slow slew rate (0.5V/μs) and limited bandwidth (1MHz). A dedicated comparator like the LM339 or LM2901 would be a better option.
  • To ensure stability, make sure to add a capacitor (typically 10-100nF) between the output and the inverting input to compensate for the op-amp's internal capacitance. Additionally, ensure the feedback loop has a sufficient phase margin (>45°) to prevent oscillations.
  • The input impedance of the LM358D is typically around 2MΩ, which is relatively high. However, this can vary depending on the specific application and circuit configuration.
  • Yes, the LM358D can be used in a single-supply configuration, but you'll need to ensure the input signals are referenced to the midpoint of the supply voltage (Vcc/2) to maintain a stable output. You may also need to add a voltage divider or level shifter to adjust the input signal levels.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LM358D Overview

Use the download button to access the LM358D schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM358, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to LM358D

Showing 0 results

LM358D Alternates

Showing results

Image Part Number Model
Part Image NCV2904DR2 onsemi

Operational Amplifier, 2 Func, 7000uV Offset-Max, BIPolar, PDSO8

Part Image NCV2904VDR2G onsemi

Operational Amplifier, 2 Func, 13000uV Offset-Max, BIPolar, PDSO8

Part Image LM258M Fairchild Semiconductor Corporation

Operational Amplifier, 2 Func, 7000uV Offset-Max, BIPolar, PDSO8

Part Image LM258AYD STMicroelectronics

Operational Amplifier, 8 Func, 4000uV Offset-Max, BIPolar, PDSO2

Part Image LM358D1 Texas Instruments

Operational Amplifier, 2 Func, 9000uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for LM358D, check out Findchips.com