Part Image

LM358PWG4 - Texas Instruments

Description: Operational Amplifiers - Op Amps Dual General-Purpose Op Amp

Download LM358PWG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LM358PWG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - PW (R-PDSO-G8)
click to zoom
3D Models
LM358PWG4 - Texas Instruments  - 3D model - Small Outline Packages - PW (R-PDSO-G8)
click to zoom

LM358PWG4 Details

  • Manufacturer Part Number:

    LM358PWG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    TSSOP-8

  • Pin Count:

    8

  • Reach Compliance Code:

    Compliant

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.5 µA

  • Bias Current-Max (IIB) @25C:

    0.25 µA

  • Common-mode Reject Ratio-Min:

    65 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    9000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.4 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -16 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.2 mm

  • Slew Rate-Nom:

    0.3 V/us

  • Supply Current-Max:

    2 mA

  • Supply Voltage Limit-Max:

    32 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    700

  • Voltage Gain-Min:

    15000

  • Wideband:

    NO

  • Width:

    3 mm

LM358PWG4 Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the LM358PWG4 is dependent on the ambient temperature and the package thermal resistance. According to the datasheet, the maximum power dissipation is 670mW at 25°C ambient temperature, and it decreases as the temperature increases.
  • While the LM358PWG4 is an op-amp, it can be used as a comparator in certain applications. However, it's not recommended for high-speed or high-frequency comparator applications due to its limited slew rate and bandwidth. Additionally, the output stage is not designed to drive low-impedance loads, which may be required in some comparator applications.
  • The input impedance of the LM358PWG4 is typically around 2MΩ, but it can vary depending on the specific application and operating conditions. This is relatively high compared to other op-amps, making it suitable for high-impedance sensor applications.
  • Yes, the LM358PWG4 can be used in a single-supply configuration, but it requires careful consideration of the input common-mode voltage range and the output voltage swing. The device can operate from a single supply voltage as low as 3V, but the input common-mode voltage range is limited to within 1.5V of the supply rails.
  • The LM358PWG4 is not the best choice for audio applications due to its limited bandwidth (1MHz) and high noise floor. It's better suited for low-frequency, low-gain applications such as sensor conditioning, instrumentation, and industrial control systems.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LM358PWG4 Overview

Use the download button to access the LM358PWG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM358, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to LM358PWG4

Showing 0 results

LM358PWG4 Alternates

Showing results

Image Part Number Model
Part Image LM358PWRG3 Texas Instruments

Operational Amplifier, 2 Func, 7000uV Offset-Max, BIPolar, PDSO8

Part Image LM358PWRG4 Rochester Electronics LLC

DUAL OP-AMP, 9000uV OFFSET-MAX, 0.7MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, TSSOP-8

Part Image LM358PWRG4-JF Texas Instruments

Operational Amplifier, 2 Func, 7000uV Offset-Max, BIPolar, PDSO8

Part Image LM358PWLE Texas Instruments

Operational Amplifier, 2 Func, 9000uV Offset-Max, BIPolar, PDSO8

Part Image LM358PWR ROHM Semiconductor

Operational Amplifier, 2 Func, 9000uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for LM358PWG4, check out Findchips.com