Texas Instruments provides a recommended PCB layout in the LM5104MX evaluation module documentation, which includes guidelines for component placement, trace routing, and thermal management to ensure optimal performance and minimize electromagnetic interference (EMI).
The input capacitors should be selected based on the input voltage range, ripple current, and ESR (Equivalent Series Resistance) requirements. A minimum of 10uF ceramic capacitors with an X7R or X5R dielectric and a voltage rating of 1.5 to 2 times the maximum input voltage are recommended. Additionally, the capacitors should be placed as close to the VIN pin as possible to minimize inductance and ensure good noise filtering.
The LM5104MX is capable of delivering up to 4A of output current, but this is dependent on the input voltage, output voltage, and thermal conditions. The device should be operated within the recommended operating conditions and thermal limits to ensure reliable operation and prevent overheating.
The LM5104MX has a built-in overcurrent protection feature that can be enabled by connecting a resistor between the OCP pin and the GND pin. The value of the resistor determines the overcurrent threshold, and the device will shut down if the output current exceeds this threshold. Additionally, an external current sense resistor can be used to monitor the output current and implement custom overcurrent protection schemes.
The EN (Enable) pin is used to enable or disable the LM5104MX. When the EN pin is pulled high, the device is enabled and operates normally. When the EN pin is pulled low, the device is disabled and enters a low-power shutdown mode. The EN pin can be used to implement power sequencing, enable/disable functionality, or to reduce power consumption in standby modes.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LM5104MX Overview
Use the download button to access the LM5104MX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM510,
or try a keyword search, such as MOSFET Drivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
