Part Image

LP38692SD-1.8/NOPB - Texas Instruments

Description: Texas Instruments LP38692SD-1.8/NOPB, LDO Voltage Regulator, 1A, 1.8 V 2.5%, 2.7 → 10 Vin, 6-Pin WSON

Download LP38692SD-1.8/NOPB Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LP38692SD-1.8/NOPB - Texas Instruments PCB footprint - Small Outline No-lead - Small Outline No-lead - NGG0006A-ren1
click to zoom
3D Models
LP38692SD-1.8/NOPB - Texas Instruments  - 3D model - Small Outline No-lead - NGG0006A-ren1
click to zoom

LP38692SD-1.8/NOPB Details

  • Manufacturer Part Number:

    LP38692SD-1.8/NOPB

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    6

  • Reach Compliance Code:

    Compliant

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    1.6 V

  • Dropout Voltage1-Nom:

    0.45 V

  • Input Voltage Absolute-Max:

    12 V

  • Input Voltage-Max:

    10 V

  • Input Voltage-Min:

    2.7 V

  • JESD-30 Code:

    S-PDSO-N6

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Load Regulation-Max:

    1%

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    6

  • Operating Temperature TJ-Max:

    125 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current1-Max:

    1 A

  • Output Voltage1-Max:

    1.89 V

  • Output Voltage1-Min:

    1.71 V

  • Output Voltage1-Nom:

    1.8 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC6,.13,38

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Seated Height-Max:

    0.8 mm

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    5%

  • Width:

    3 mm

LP38692SD-1.8/NOPB Frequently Asked Questions (FAQs)

  • The recommended input capacitor value is 1uF to 10uF, depending on the input voltage and output current requirements. A larger capacitor value can help to reduce input voltage ripple and improve output voltage regulation.
  • To ensure stability, it's essential to follow the recommended PCB layout guidelines, use a sufficient input capacitor, and add a 10nF to 100nF capacitor between the Vout and Vin pins to filter out high-frequency noise. Additionally, ensure that the output capacitor is properly sized and placed close to the output pin.
  • The LP38692SD-1.8/NOPB can deliver up to 1.5A of output current, but this may vary depending on the input voltage, output voltage, and ambient temperature. It's essential to check the device's thermal performance and ensure proper heat sinking to prevent overheating.
  • The LP38692SD-1.8/NOPB is rated for operation up to 125°C, but its performance may degrade at higher temperatures. It's essential to ensure proper heat sinking and thermal management to prevent overheating and ensure reliable operation.
  • The output voltage of the LP38692SD-1.8/NOPB can be adjusted by using a resistive divider network between the Vout and ADJ pins. The output voltage can be calculated using the formula: Vout = 1.8V x (R1 / R2 + 1), where R1 and R2 are the resistors in the divider network.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LP38692SD-1.8/NOPB Overview

Use the download button to access the LP38692SD-1.8/NOPB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LP386, or try a keyword search, such as Linear Regulator ICs

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to LP38692SD-1.8/NOPB

Showing 0 results

LP38692SD-1.8/NOPB Alternates

Showing results

Image Part Number Model
Part Image LP38692SD-1.8/NOPB National Semiconductor Corporation

Fixed Positive LDO Regulator, 1.8V, 1.6V Dropout, CMOS, PDSO6

Part Image LP38692SD-1.8 National Semiconductor Corporation

Fixed Positive LDO Regulator, 1.8V, 1.6V Dropout, CMOS, PDSO6

Part Image LP38692SDX-1.8/NOPB Texas Instruments

Fixed Positive LDO Regulator, 1.8V, 1.6V Dropout, CMOS, PDSO6

Part Image LP38692SD-1.8 Texas Instruments

Fixed Positive LDO Regulator, 1.8V, 1.6V Dropout, CMOS, PDSO6

Part Image LP38692SDX-1.8 Texas Instruments

Fixed Positive LDO Regulator, 1.8V, 1.6V Dropout, CMOS, PDSO6

For a full list of alternate parts for LP38692SD-1.8/NOPB, check out Findchips.com